VFW interface is down after configuring

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

VFW interface is down after configuring

L0 Member

Hi all,

 

I am new to the paloalto vFW.

 

I am using vFW VNF in openstack and after confoiguring the interface 1/1 and 1/2, both interface state is showing as down.

 

I have configured as per the topology made in openstack.

 

Please suggest how to make interface state enable.

1 REPLY 1

L4 Transporter

Try rebooting the firewall. At the top of my head the inferfaces on virtual firewalls are detected at boot time, so if those were added to openstack after you turned on the firewall that may be the issue.

 

regards,

Gerardo.

  • 2116 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!