VM Home LAB issues

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

VM Home LAB issues

L0 Member

Hey All looking for some help on a VM Palo that lives on a dedicated ESX box

See attached diagram sorry if its confusing

 

ISP modem(192.168.10.1) --Palo WAN port ether1/1 using sub interface ether 1/1.10 (192.168.10.3)

 

Switch (VLAN1 192.168.10.2) --> Palo LAN Port on eth1/2 using sub interface eth 1/2.10 (192.168.10.4)

 

A machine on 192.168.10.X can ping 192.168.10.4 fine

 

I can log into the Palo fine at 192.168.10.4

Cannot ping the WAN interface at 192.168.10.3

Cannot get out to the internet

 

I think I have a routing issue but not sure where.

What static routes would I need on the virtual routers?  I do no need 2 VRs since they are on the same subnet

VR 1 - default and contains the WAN interface

VR 2 - contains LAN interface

 

I realize I should move the Modem to a separate network, which I will do and the WAN interface.  For now I am trying to get this working without having internet downtime.  Any help is appreciated

 

 



Please note you are posting a public message where community members and experts can provide assistance. Sharing private information such as serial numbers or company information is not recommended.



Please note you are posting a public message where community members and experts can provide assistance. Sharing private information such as serial numbers or company information is not recommended.
2 REPLIES 2

Community Team Member

Hi @ryansoto12 ,

 

Can you create a default route on the VR that has the internal and as the next hop, specify the other VR.

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Hey @JayGolf  I have cleaned the mess up

Its as attached

From 192.168.10.X I cannot ping 192.168.10.1 (LAN interface on Palo) or 192.168.9.3 (WAN Interface on Palo)

Also why is the Palo picking up traffic at this point?  I have nothing on the network with a Default Gateway as the Palo.  Everything is still has a default gateway of 192.168.10.2 or 192.168.50.2 (Switch vlan IPs ) with a static route to the ISP at 192.168.9.1

Appreciate the time!

  • 2685 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!