- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
08-04-2021 08:12 PM
VPN Site-2-Site both sides with dynamic IP
Good afternoon, first of all, thank you very much for your support and help.
Is it possible to configure the following:
Site 1: Palo Alto with Dynamic output to the Internet.( already have NAT configured on the modem/router/ADSL pointing to the Private WAN IP.
Site 2: Palo Alto with Dynamic output to the Internet (already have NAT configured on the modem/router/ADSL pointing to the Private WAN IP).
Site 2 has DynDNS service configured, so it has a FQDN ( vpnsite2site.dyndns.net ).
Is it feasible to be able to set up a site to site tunnel between these two high stick/sites with dynamic ip and on one end a dyndns FQDN?
Connection scheme:
Site1: Palo Alto Wan 192.168.1.100 ---GW 192.168.1.254 ----Router/ADSL/Modem/NAT:1:1------IPSEC-VPN-----Internet-----IPSEC-VPN-----FQDN ( vpnsite2site. dyndns.net) Router/ADSL/Modem/NAT:1:1Site2:GW192.168.2.254 ---R-----IPWAN--192.168.2.100---GW192.168.2.254
Thank you very much, I remain attentive, thank you.
08-05-2021 10:02 AM
In theory, as long as the one site has a Dynamic DNS setup to get to it, then it should work that way.
But if the source did not, then it wouldn't be possible to establish the tunnel the other way.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!