Vulnerabilities detected during scan

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Vulnerabilities detected during scan

L2 Linker

Hi all, 

 

I ran a vulnerability scan on my Palo Alto this afternoon, and I am receiving the following vulnerability:

 

Screen Shot 2016-10-11 at 6.56.17 PM.png

 

 

I am a little confused as to why I am receiving it since I have one TLS/SSL Service Profile (using TLSv1.2 strictly) that is setup to use a signed certificate from 3rd party CA.  Moreover, I cannot find that certificate listed in the vulnerability anywhere on the firewall (the EMAILADDRESS=support@paloaltonetworks.com, CN=localhost, OU=Support, O=Palo Alto Networks, L=Sunnyvale, ST=CA, C=US).  The only thing I am thinking is that I do have a self-signed certificate that I use to administer to my GlobalProtect satellites.  

 

Any ideas on how I could patch this?  Any tips or advice is much appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

Hi

that certificate is the self-signed certificate factory loaded onto the device pending replacement by a public certificate

 

did you scan your management interface or a dataplane interface with a management profile (this is the most common spot for you to encounter this certificate)

 

 

did you set the ssl/tls profile in the management configuration ?

2016-10-12_09-23-37.png

Tom Piens
PANgurus - (co)managed services and consultancy

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Hi

that certificate is the self-signed certificate factory loaded onto the device pending replacement by a public certificate

 

did you scan your management interface or a dataplane interface with a management profile (this is the most common spot for you to encounter this certificate)

 

 

did you set the ssl/tls profile in the management configuration ?

2016-10-12_09-23-37.png

Tom Piens
PANgurus - (co)managed services and consultancy
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!