What is a command to exit from VSYS?

[Shohei]

Hi,

I can not exit from VSYS.
I tried "quit" ,"exit" and others command,but was not able to exit.

Could you tell me it?

Device:PA-2050(3.1.3)
---------
admin@PA-2050 vsys2> set system setting target-vsys vsys2
Session target vsys changed to vsys2
admin@PA-2050 vsys2>
---------

Thanks,

Shohei

[nrice]

Hi Shohei,

The command to exit the VSYS is

>set system setting target-vsys none

We've opened a bug on the command however, because the prompt does not change after entering the command.  Until the fix is in place, you can verify that you are in "none" with the command:

>show system setting target vsys

[Shohei]

Hi,

I see.Thanks for answer.

Regards,
Shohei Yamashita.

[nrice]

Please note that if you are changing from one, vsys to another,  the prompt does work correctly.  If you are in vsys2 and change to vsys1

> set system setting target-vsys vsys1  the prompt will correctly display:

Session target vsys changed to vsys1
@archeo_falcon_secondary vsys1>