Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

What is a command to exit from VSYS?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

What is a command to exit from VSYS?

L1 Bithead

Hi,

I can not exit from VSYS.
I tried "quit" ,"exit" and others command,but was not able to exit.

Could you tell me it?

Device:PA-2050(3.1.3)
---------
admin@PA-2050 vsys2> set system setting target-vsys vsys2
Session target vsys changed to vsys2
admin@PA-2050 vsys2>
---------

Thanks,

Shohei

3 REPLIES 3

L5 Sessionator

Hi Shohei,

The command to exit the VSYS is

>set system setting target-vsys none

We've opened a bug on the command however, because the prompt does not change after entering the command.  Until the fix is in place, you can verify that you are in "none" with the command:

>show system setting target vsys

Hi,

I see.Thanks for answer.

Regards,
Shohei Yamashita.

Please note that if you are changing from one, vsys to another,  the prompt does work correctly.  If you are in vsys2 and change to vsys1

> set system setting target-vsys vsys1  the prompt will correctly display:

Session target vsys changed to vsys1
@archeo_falcon_secondary vsys1>

  • 2408 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!