Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

why is interface has no zone configuration?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

why is interface has no zone configuration?

L1 Bithead

Configure the following alarms
The interface also cannot ping

Where is the configuration problem?

 

5.png

 

 

 

1.png2.png3.png4.png

 

 

 

4 REPLIES 4

Cyber Elite
Cyber Elite

@sobigfat,

Validate what the configuration is showing in the CLI, and if it matches the GUI try running the validate within the CLI instead of the GUI. 

Cyber Elite
Cyber Elite

see if something odd shows up in config audit, then try a 'revert to running'

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

@BPry

 

Configuration I have committed, but there is still no regional configuration in the CLI.

I reset the device, it will work normally after reconfiguring according to the original configuration, and the CLI can also see the area information.

@reaper

 

Very strange, the device is reset, there is no other configuration, I have no way, the configuration can work normally after resetting the device again.

  • 3446 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!