Global Protect Not Installing Virtual Network Driver

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Global Protect Not Installing Virtual Network Driver

L1 Bithead

Host OS is Windows 10 Pro ARM Build 21354

Global Protect 64-Bit Windows 10 v 5.2.1-9

 

Installation appears to be successful, but GP fails to connect to portal.

 

An Intel install shows a PAN GP Virtual Ethernet driver install under Network adapters in Device Manager

This driver does not appear in the ARM install.

 

Similarly, the Intel install has pangpd.sys located in C:\Windows\System32\drivers\

There is no driver the drivers folder in the ARM install

 

Any thoughts on a resolution?

Thanks!

 

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

@Breathless,

GlobalProtect doesn't currently support ARM if you are trying to use the full client; you would need to utilize the Windows 10 UWP available on the Windows Store instead of the full client. 

View solution in original post

4 REPLIES 4

Cyber Elite
Cyber Elite

@Breathless,

GlobalProtect doesn't currently support ARM if you are trying to use the full client; you would need to utilize the Windows 10 UWP available on the Windows Store instead of the full client. 

Thank you for the response. I will obtain from the MS store.

 

 

L0 Member

Stop WMI servicesby running services.msc. services.msc Windows Management Instrumentation(WMI).
Delete the files under C:\Windows\System32\wbem\Repository
Open regeditGo to HKEY_LOCAL_MACHINE> Software and HKEY_CURRENT_USER> Software. Uninstall the Palo Alto Networks folder.
If the same folder is present in a different user's HKEY_USERS, remove it.
GlobalProtect "features and programs" must be removed from Windows.
Check that the virtual adapter isn't included in the Network adapter settings.
Reboot the computer.
Reinstall GlobalProtect using admin privileges
Verify that the WMI service is running.

-admin :As per my analysis this will help you a lot.

L1 Bithead

I have reached out to vendor about supporting the UWP version of Global Connect as any other suggestions to get the non-UWP to properly install on Windows 10 ARM have failed.

 

The vendor seems hesitant if not unwilling to "offically" support the UWP version.

 

Can anyone share what is involved?

 

Does it require significant effort to support in terms of configurration or is it trivial?

 

Are there any any other security concerns using the UWP version that should be considered?

  • 1 accepted solution
  • 8004 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!