06-16-2023 12:33 AM
Hi Team,
We have a requirement to configure the Global Protect as below.
> We have 3 locations to connect to.
Users should connect to one of these 3 locations based on their nearby location. If User 1 is near to GW3 then he should connect to GW3. If GW3 is not available, then the next nearest location should be connected automatically. Is this possible?
If so what is the best way to acheive this?
Regards,
Sanjay S
06-16-2023 01:22 AM
Hi @Sanjay_Ramaiah ,
Make all of your gateways the same priority, and the GP client should pick the one with the lowest latency.
https://knowledgebase.paloaltonetworks.com/kCSArticleDetail?id=kA10g000000ClVz
Thanks,
Tom
06-16-2023 02:54 AM
OK so why would you need to do this...... and are you talking geo location as in different countries or just in different towns/cities
06-16-2023 01:22 AM
Hi @Sanjay_Ramaiah ,
Make all of your gateways the same priority, and the GP client should pick the one with the lowest latency.
https://knowledgebase.paloaltonetworks.com/kCSArticleDetail?id=kA10g000000ClVz
Thanks,
Tom
06-16-2023 02:54 AM
OK so why would you need to do this...... and are you talking geo location as in different countries or just in different towns/cities
06-19-2023 11:15 PM
Hi Mick, it is different cities/towns.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
