How to count the detection messages in the path monitor ping packet

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

How to count the detection messages in the path monitor ping packet

L3 Networker

Can the packet capture function of the firewall capture ping detection messages sent from the e1/1 interface?

The customer wants to confirm that the wall is sending detection messages normally?

微信图片_20231026003256.png

1 REPLY 1

Cyber Elite
Cyber Elite

Hi @Felixcao ,

 

Yes, it can.  Create a filter with one entry:  no ingress interface and destination IP used for path monitoring.  Capture packets in the transmit stage, and you will capture the ICMP packets.

 

You can also run the CLI command "show high-availability path-monitoring" and you will see the rtt min/max/avg (ms) times.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.
  • 601 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!