11-14-2025 06:20 PM
We have 3220 appliance and we want to migrate configuration to new 1410 appliance. Please provide link for migration tool
11-17-2025 08:25 AM
The migration tool is not supported anymore and would be drastically overkill to use when going between a PAN-OS device to another PAN-OS device. I would go about exporting the configuration from your PA-3220s and importing it onto your new hardware assuming that you either set the same master key between devices so things like the pre-shared-key and phash values are the same or if you've left them as default. This way if you need to make any changes to interfaces you can do that easily directly in the XML before you load it between devices. Once you load the new configuration just check things over and make sure you don't need to correct any validation issues.
11-17-2025 10:24 AM - edited 11-17-2025 10:25 AM
Hi @A.Choughule ,
@BPry is correct. I can't think of any changes you would need to make except interfaces. Even those are the same except 1/17 and 1/18 are 10 Gbps on the PA-3220 and 1 Gbps on the PA-1410. The best way to change those would be search and replace in the XML. The GUI will take too many clicks.
Thanks,
Tom
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
