- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-15-2024 06:17 AM
Good Morning!
I am not seeing any network activity in the ACC tab for my 450. I've cleared all filters just in case, restarted the management plane, I even failed over to see if it was isolated to the one unit. Both are showing this. When I set the date spans, I see that the 9th is the last time datapoints were added to the display. The ONLY change that was done when I audit the config is an update to a security policy rule where I enabled logging. Currently running 11.1.1 PanOS
02-16-2024 06:27 AM
Hi @RMaillet ,
I suspect that you might be running into bugID PAN-234929 which reported similar behavior.
I recommend reaching out to support to confirm if you're hitting this exact same bug or are experiencing a different issue.
I also recommend checking the reportd debug logs and logrcvr.log for more information.
Have you tried restarting log-receiver ?
Kind regards,
-Kim.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!