07-08-2023 03:46 PM
As the title states. I have an interface on PA-820 that shows "configured but down".
This is really silly but I know the interface was "switched off" by another network admin. Under Advance --> LinkState is set to Auto already.
There is some other setting that put the interface in a non-workable state which I just cannot find it.
07-08-2023 04:07 PM
Hello @ITBrute
to me it looks like the cable is disconnected. Have you verified that cable is connected and device on the other side is powered on?
Kind Regards
Pavel
07-08-2023 05:26 PM
Hey @PavelK there is nothing connected it is just vacant. I wanted to connect a switch but I can't because the port is down.
07-08-2023 11:57 PM
Hello @ITBrute
this is expected. The interface is enabled, but nothing is connected, therefore marked as down (red). After you connected cable, it should come online (green) unless there is connectivity issue. The only scenario other then these two is gray where interface is set to default KB.
Kind Regards
Pavel
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
