Map only specific local drive

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM SaaS Articles
1 min read
L0 Member
No ratings

This article is useful If the Allow Mapping drive is enabled and is only required to map specific local drives to the target server or to the component.
 

Steps

Go to the Connection Component in the PVWA. This can be set in General Settings or by specific Platform.

Option A: General Settings

PVWA > Options > Connection Components > PSM-[Component]

1) Right Click on "Component Parameters" and select "Add Parameter"
ka32J00000052wdQAA__eid=ka32J00000052wd&feoid=00N2J000009R3kv&refid=0EM2J000004R5oG.png

Name: drivestoredirect:s:
Value: [DriveLetter]:;

For example, 
Name: drivestoredirect:s:
Value: F:;
eid=ka32J00000052wd&feoid=00N2J000009R3kv&refid=0EM2J000004R5nX.jpg


2) AllowMappingLocalDrives should be enabled.
ka32J00000052wdQAA__eid=ka32J00000052wd&feoid=00N2J000009R3kv&refid=0EM2J000004R5pJ.png
Restart the PSM Service or wait for 10 minutes.


Option B: Specific Platform Setting

PVWA > Administration > Platform Management 
Click "Edit" on the Platform you want to modify
Go to UI& Workflows > Connection Components > PSM-[Component]

1a) Right Click on the Connection Component you want to modify and select "Add Override Component Parameters".
ka32J00000052wdQAA__eid=ka32J00000052wd&feoid=00N2J000009R3kv&refid=0EM2J000004R5rF.png
1b) Right click on the newly created "Add Override Component Parameters" menu and select "Add Parameter"
ka32J00000052wdQAA__eid=ka32J00000052wd&feoid=00N2J000009R3kv&refid=0EM2J000004R5ql.png
Name: drivestoredirect:s:
Value: [DriveLetter]:;

For example, 
Name: drivestoredirect:s:
Value: F:;

2) AllowMappingLocalDrives should be enabled.  
Restart the PSM Service or wait for 10 minutes.

 

Please Note:

The drivestoredirect:s parameter is defined by Microsoft and is not officially supported by CyberArk.

 

Rate this article:
  • 4336 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-10-2022 09:58 AM
Updated by: