- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
This article is useful If the Allow Mapping drive is enabled and is only required to map specific local drives to the target server or to the component.
Go to the Connection Component in the PVWA. This can be set in General Settings or by specific Platform.
Option A: General Settings
PVWA > Options > Connection Components > PSM-[Component]
1) Right Click on "Component Parameters" and select "Add Parameter"
Name: drivestoredirect:s:
Value: [DriveLetter]:;
For example,
Name: drivestoredirect:s:
Value: F:;
2) AllowMappingLocalDrives should be enabled.
Restart the PSM Service or wait for 10 minutes.
Option B: Specific Platform Setting
PVWA > Administration > Platform Management
Click "Edit" on the Platform you want to modify
Go to UI& Workflows > Connection Components > PSM-[Component]
1a) Right Click on the Connection Component you want to modify and select "Add Override Component Parameters".
1b) Right click on the newly created "Add Override Component Parameters" menu and select "Add Parameter"
Name: drivestoredirect:s:
Value: [DriveLetter]:;
For example,
Name: drivestoredirect:s:
Value: F:;
2) AllowMappingLocalDrives should be enabled.
Restart the PSM Service or wait for 10 minutes.
Please Note:
The drivestoredirect:s parameter is defined by Microsoft and is not officially supported by CyberArk.