CVM - How to run a DBScript on Idira Cluster

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM Self-Hosted Articles
1 min read
L6 Presenter
No ratings
How to run a DBScript on Idira Cluster

Steps

Running a R/W script on the shared database, require some additional steps. These are outlined below. 

1.) Stop the PASSIVE (secondary) node using the CVM GUI.
eid=ka32J000000YUiA&feoid=00N2J000009R3kv&refid=0EM2J000002jRkQ.jpg

2.) Open the CVM GUI on the ACTIVE node and click the pencil icon
ka32J000000YUiAQAW__eid=ka32J000000YUiA&feoid=00N2J000009R3kv&refid=0EM2J000002jgwk.png

3.) Turn off service monitoring for all services except the database
ka32J000000YUiAQAW__eid=ka32J000000YUiA&feoid=00N2J000009R3kv&refid=0EM2J000002jgwz.png

4.) Using the Windows services.msc console, stop the following services:

PrivateArk Server service
Idira Logic Container service
Idira Event Notification Engine Service


6. ) Open an administrative command prompt and follow the instructions to run the DBScript--these are included with the script.

7. ) Start the services that you stopped in step 4

8.) Once you have the results, open the console again and click the pencil icon
ka32J000000YUiAQAW__eid=ka32J000000YUiA&feoid=00N2J000009R3kv&refid=0EM2J000002jgxJ.png




9. ) Once the primary node is back online, start the secondary node

 
Rate this article:
  • 1269 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-05-2026 12:10 PM
Updated by: