How to check PTA DR replication

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
PAM Self-Hosted Articles
1 min read
L6 Presenter
No ratings
When you have 2 PTA's and one is in DR mode, it is good to check the replication once in a while.
 

Steps

1.) Log into the primary PTA as root
2.) Run the following command:

[root@PTAServer ~]# RUN_DIAGNOSTICS P092

ka3Vy000005mvp7IAA__eid=ka3Vy000005mvp7&feoid=00N2J000009R3kv&refid=0EM2J000002kPEE.png

3.) Make sure both STATIC_FILES and DATABASE show SUCCESS
4.) If either is not successful, please try this article

 

https://community.cyberark.com/s/article/PTA-DR-Replication-Failure

Rate this article: