PSMP-ADBridge Configuration

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
PAM Self-Hosted Articles
1 min read
L3 Networker
No ratings
This article is intended to supplement the documentation located at https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/Latest/en/Content/PASIMP/Configuring-the-PSMP-t...

While the link provides instructions for version 12.1 it should also be applicable to earlier releases.
 

Steps

  1. Create the user provisioning platform as shown in the documentation. Ensure you remove the ‘Username’ from ‘UI & Workflows’ -> ‘Properties’ -> ‘Required’
  2. Leave the ‘LogonAccount’ in the ‘UI & Workflows’ -> ‘Linked Accounts’
  3. Add the target machine account as shown in the documentation
    1. This is usually the ‘root’ user. The user can have an associated logon account.
  4. Ensure that the PSMP_ADB_<psmp> has ‘Use’, ‘Retrieve’ and ‘List’ account permissions on the safe where the root user resides. In addition, if the logon account is located in a different safe, the PSMP_ADB_<psmp> must have the same permissions on the safe where the logon account is stored:

ka3Vy0000092YziIAE__eid=ka3Vy0000092Yzi&feoid=00N2J000009R3kv&refid=0EM2J000002iCsM.png
 
Connection Steps
 
  1. Once the configuration is complete, test a connection. The connection string must be in the form of <vaultuser>@<target address>@<PSMP>, where
    1. Vaultuser is the user in AD that connects to the target system. This user must be in Active Directory and have ‘Use’ and ‘List’ permissions on the safe where the provisioning account is store

ka3Vy0000092YziIAE__eid=ka3Vy0000092Yzi&feoid=00N2J000009R3kv&refid=0EM2J000002iCsN.png

 


 
Rate this article:
  • 3064 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-02-2025 09:00 PM
Updated by: