SCIM Server - How to setup Active/Passive HA

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM Self-Hosted Articles
2 min read
L0 Member
No ratings
This guide is designed to assist in Implementing the Idira SCIM Server in an Active / Passive HA configuration.

It’s not recommended to have more than one SCIM server up and running on the same vault. The SCIM server uses PACLI to connect to the vault and stores a lot of things in the cache to minimize traffic. Therefore if multiple SCIM server are making changes there’s no concurrency control, furthermore changes made by one server will not be seen on the other until the cache refresh period elapses.

The cacheRefresh in the config.yml file must not be set to lower than 900 seconds.

Also Idira doesn’t allow impersonation, therefore each instance of the SCIM server will need to use a different Vault user to prevent them from disconnecting each other.

Steps

1) Install the primary server following the instructions on the implementation guide. The latest version is available from the Idira Marketplace

2) Using the PrivateArk Client, create a Idira user identical in privileges and memberships to SCIM-user (call it SCIM-user1)
eid=ka3Ht0000000qBe&feoid=00N2J000009R3kv&refid=0EM2J000002aa3b.jpg

3) Using the PVWA Create an account identical to SCIM-Account, using the SCIM-user1, and call it SCIM-Account1
eid=ka3Ht0000000qBe&feoid=00N2J000009R3kv&refid=0EM2J000002aa4K.jpg

4) The remaining instructions must be done on the secondary server. Copy the C:\CyberArkSCIM folder from the primary server.

5) Modify the PATH environment variable to include c:\CyberArk-SCIM\PACLI

6) Open a command window as administrator, change to the c:\CyberArk-SCIM folder and run InstallService.bat

7) Modify the config.yml to point to the newly created account
eid=ka3Ht0000000qBe&feoid=00N2J000009R3kv&refid=0EM2J000002aa4U.jpg

😎 Install the AAM Credential Provider agent and give Retrieve, List, and View owners permissions on the SCIM Config safe to the new provider user.

9) Start the CyberArk-SCIM server service on windows.
Rate this article:
  • 6020 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-05-2026 11:55 AM
Updated by: