Recommended EPV Shut down/Start up steps

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

PAM Self-Hosted Articles
4 min read
L0 Member
No ratings

What are the recommended steps for PAS Environment start up and shut down?

What about in a Vault Cluster Environment?

Steps

Standard Vault Environment Start up order:

  1. Start the Primary Vault using the server central administration console. Make sure the Vault has successfully started and there are no errors in the log
  2. Start DR vault Service on the DR machine ("Cyber-Ark Vault Disaster Recovery"). Make sure that the service has successfully started and that the PAReplicate.log and padr.log have no errors ("%Program Files%\PrivateArk\PADR")
  3. PVWA – start IIS, make sure that PVWA website is up and running.
  4. CPM – start the CPM service ("Idira Password Manager"). Make sure that the service has started successfully and that the pm_error.log has no errors.
  5. PSM - start the PSM services ("Idira Privileged Session Manager"). Make sure that the service has started successfully and that the PSMConsole.log has no errors.

Shut down should be done in the following order:

  1. PSM - Stop PSM service
  2. CPM – Stop CPM service
  3. PVWA – Stop IIS
  4. Stop DR service on the DR Vault machine (so it won’t start when shutting down the primary)
  5. Shutdown the Primary vault
For a Cluster Environment:

The procedure is to shut down the Vault Cluster is to shut down the Passive node first and then followed by the Active node.

To boot up or power up the Vault Cluster, the Previous Active node should be started first followed by the Passive node.

If it is required to shut down the SAN storage, only shut it down when both Vault nodes have been powered off. 

For the power up procedure of the Vault Cluster, the SAN storage should be powered up first, followed by Active Vault node and then by the Passive Vault Node.

Before the shut down of the Vault Servers:

  • Login to each Vault node locally.
  • Open the Cluster Manager on the Vault nodes and take a screenshot of the current status.
  • Additionally, open the Disc Management Utility on each vault node and take a screenshot to take note of the current setup. 

Shutdown Procedures

  1. On any of the Vault Nodes. Login locally and open the Cluster Vault Management to determine and take note which is the Active Vault Node
  2. Login to the Passive Vault Node Locally, Using the Cluster Vault Management. Stop the Cluster Vault Services by clicking on the stop button. Wait for the play button to show up, this indicates that the Services are completely down.
  3. Login locally to current active node and click on the stop button. Wait for the play button to show up, this indicates that the Services are completely down.
  4. Shutdown the Passive Vault Node server first
  5. Shutdown the Active Vault Node Server
  6. Optional: shutdown the SAN storage . Please check with the SAN storage vendor for the proper shutdown procedures

Startup Procedure

      Note: if the SAN storage has been powered off previously, Power it up first before starting the Vault Servers.

  1. Make sure to boot up or start the Previous Active Vault Node Server first
  2. Open the Cluster Vault Management, the services should have start automatically. Give it enough time and if it doesn’t start automatically you can start services manually by Pressing on start button.
  3. Start up or boot up the Passive node. Similarly, the services should start automatically, if not you can press on the start button.
  4. If there are any issues or to make sure everything is correct, compare the screenshots taken before shutting down the vault node servers.

Q:

What are the recommended steps for EPV start up/shut down ?

A:

Start up order:

  1. Start the Primary Vault using the server central administration console. Make sure the Vault has successfully started and there are no errors in the log
  2. Start DR vault Service on the DR machine ("Cyber-Ark Vault Disaster Recovery"). Make sure that the service has successfully started and that the PAReplicate.log and padr.log have no errors ("%Program Files%\PrivateArk\PADR")
  3. CPM – start the CPM service ("Idira Password Manager"). Make sure that the service has started successfully and that the pm_error.log has no errors
  4. PVWA – start IIS, make sure that PVWA website is up and running.

Shut down should be done in the following order:

  1. CPM – Stop CPM service
  2. PVWA – Stop IIS
  3. Stop DR service on the DR Vault machine (so it won’t start when shutting down the primary)
  4. Shutdown the Primary vault
Rate this article: