Fix error ITALD015E

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Fix error ITALD015E

L1 Bithead

First time user.

 

Vault server:

  • Windows 2022 server VM on ESXi,
  • CyberArk Server-RIs-v13.2
  • domain=WORKGROUP (stand-alone)

Component server

  • Windows 2022 server VM on ESXi,
  • CyberArk Access-RIs-v13.2.1 and Manager-RIs-v13.2.1
  • domain joined

 

On Vault, getting error ITALD015E LDAP configuration was not refreshed successfully.

 

Browsing from Component server to Vault show health is OK (green).

Attempting to configure LDAP fails with error:

Failed to connect to the domain

Could not establish a connection to the selected domain controllers

• Verify that each of the domain controllers was added to the Vault's hosts file.

• If you are using a secure connection make sure the relevant certificate is imported to the vault

 

Vault host file contains domain controller entry (can ping domain controller using computer name).

Vault trusted root cert store contains the domain controller, sub-CA, and root-CA certs (added all just in case).

 

Can’t find the LDAPconfig.xml file mentioned in various articles.

 

Please help.

11 REPLIES 11

L7 Applicator

hey @Dalier J Ramirez​ 

I'd suggest reviewing the LDAP setup via the PVWA and confirm your bind account is setup correctly.

 

-Matt

Matt: Thanks for your reply. It fails as shown in the image: [cid:[email protected]] Vault host file contains domain controller entry (can ping domain controller from Vault using domain name, not IP). Vault trusted root cert store contains the domain controller, sub-CA, and root-CA certs (added all just in case).

the picture isn't showing up.

 

Did you review the config in your PVWA following the docs I linked?

 

-Matt

It fails on step 4, before Create directory mapping. “In the Select domain controllers area, from the list of detected domain controllers, select one or more of the domain controllers to map and then click Connect.”

did you check your bind user account yet like I suggested? Has this ever worked before?

 

-Matt

From the Vault server C:\Users\Administrator\Downloads>openssl verify -CAfile interop-root-ca.cer -untrusted interop-sub-ca.cer domain-controller.cer domain-controller.cer: OK C:\Users\Administrator\Downloads>ping controller.interop.local Pinging controller.interop.local [10.194.148.53] with 32 bytes of data: Reply from 10.194.148.53: bytes=32 time<1ms TTL=128 Reply from 10.194.148.53: bytes=32 time=1ms TTL=128 Reply from 10.194.148.53: bytes=32 time<1ms TTL=128 Reply from 10.194.148.53: bytes=32 time=1ms TTL=128 Ping statistics for 10.194.148.53: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\Users\Administrator\Downloads>ldp.exe ld = ldap_sslinit("controller.interop.local", 636, 1); Error 0 = ldap_set_option(hLdap, LDAP_OPT_PROTOCOL_VERSION, 3); Error 0 = ldap_connect(hLdap, NULL); Error 0 = ldap_get_option(hLdap,LDAP_OPT_SSL,(void*)&lv); Host supports SSL, SSL cipher strength = 256 bits Established connection to controller.interop.local. From the Component Server LDAP Integration > Select domain controller Failed to connect to the domain Could not establish a connection to the selected domain controllers • Verify that each of the domain controllers was added to the Vault's hosts file. • If you are using a secure connection make sure the relevant certificate is imported to the vault.

From the Vault server Opened browser to https://cyberarkepv-c/PasswordVault/v10/logon/cyberark LDAP Integration > Select domain controller Failed to connect to the domain Could not establish a connection to the selected domain controllers * Verify that each of the domain controllers was added to the Vault's hosts file. * If you are using a secure connection make sure the relevant certificate is imported to the vault. Same error. Any ideas?

Matt, I followed the steps in https://community.cyberark.com/s/article/How-to-use-LDP-EXE-to-check-connectivity-and-access-to-AD as you suggested. All good. However, still getting the same error.

I'm not sure what to try next then. You'll need to figure out why your Vault can't talk to your LDAP. There's a disconnect somewhere.

 

-Matt

L1 Bithead

Can I schedule a short meeting with you to take a look at my setup? MS Teams OK?

I'm unable to do that as I am no longer a Support engineer and do not engage in direct screen sharing assistance.

 

If you'd like to have someone from CyberArk to review your setups you'll need to open a Support Case.

 

-Matt

  • 307 Views
  • 11 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!