Panorama mgmt CPU usage

[Deepak_K]

We are managing 4 location HA pair from Panorama and collecting logs using management interface of M200. (all devices and panorama in same data centre)

Sometimes we observed delay in logs and commit operation , but mgmt cpu of M200 is less than 50% at that time.

mgmt cpu utilization in panorama is showing utilization of only mgmt interface or overall utilization of box ?

[nikoolayy1]

I think if you see that the CPU is not the issue then check the memory, interface buffers and disk errors:

For interface:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClWoCAK

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClV7CAK

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClXOCA0

For Memory:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClUbCAK

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000POEKCA4&lang=en_US%E2%80%A...

Disk usage:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cld2CAC

Also check this article for slow commits:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm1CCAS

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Clu8CAC