Template not being pushed to new devices

[M.Allen]

Hi,

I have added some new firewalls to Panorama and would like to deploy templates to them. I added them to the correct device groups and stacks and saved on Panorama.

When I click push to devices I am getting a lot of errors as seen below..

Why are the new firewalls not being configured with the template configs?

These new firewalls are replacing the old ones so I have replicated the current device group and templates.

[M.Allen]

I have added the devices to the correct groups and committed to panorama. Do I then need to push the device group to the Palos before applying templates?

When attempting to push device groups to the Palo's it fails..

Here is the fail to push device group details

Also once the above is sorted do I then define the template stacks for each firewall.. when does the shared policy sync?

#

[CosminM · Accepted solution]

Hi @M.Allen 

When you are pushing template config to your firewall, in security zone configuration you are using a log-forwarding profile called "default" that doesn't exist yet on your new firewalls.

The log-forwarding profiles are part of Device Groups.

To mitigate the template push error, you have two options:

• eliminate from template zone config the log settings
• or on each firewall to create a log-forwarding profile called "default" and at the end when you finish to push also the device group (that for sure include a log-forwarding profile called) go back to each firewall and delete the local created log-forwarding profile