12-03-2024 01:07 PM
I notice that Prisma SD-WAN will not advertise static routes into BGP. Sounds like a bug in the software as I found articles discussing this from 1+ years ago. Does anyone know if there is a fix for this. Only way I can see is the LAN side will need to run BGP or OSPF for the redistribution of the routes to happen. I have a TAC Case opened to get an official answer.
I am running the IONs on 6.4.2-b4 software code as I need VRF support over Standard VPN tunnels to fully isolate the network(s) in question.
12-04-2024 04:12 AM
This is not a bug, it's not supported currently. On the LAN side do you not already have BGP or OSPF running to your DC Core? Can you inject the prefix there as you'd suggested?
12-05-2024 08:34 AM
Like @rgallagher stated you can either enable OSPF or BGP on LAN and inject the static routes there or you could summarize your site (including the static routes) and advertise that across the fabric. I think you could also add the route(s) in the "IP Prefixes" under the branch.
HTH
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
