CCP Client Certificate Authentication SAN Value

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

CCP Client Certificate Authentication SAN Value

L5 Sessionator

It can be very basic question for many but not for me. I am curious to know and learn about this.

I was going through below document related to Client Certificate authentication and there is it is mentioned that we can use the SubjectAlternativeName, Subject, or Issuer attribute to authenticate the application instead of the serial number. I see we have "Serial Number" option in application tab of the PVWA for any appID however, If I need to put SAN value then where should I populate?

 

Application authentication methods | CyberArk Docs

1 accepted solution

Accepted Solutions

There is another DELETE call that you make via REST API - https://docs.cyberark.com/pam-self-hosted/latest/en/content/webservices/delete%20a%20specific%20authentication.htm

View solution in original post

8 REPLIES 8

L4 Transporter

Hello,

The following link contains a section describing setting up certificate mapping in IIS to do what you describe. https://docs.cyberark.com/credential-providers/latest/en/content/ccp/configure_ccpwindows.htm

 

So basically, I need to create another web service similar to `AIMWebService` and SAN value info over there and not anything in PVWA's console AppID part?

L4 Transporter

Hello,

It is more adding a feature set to the AIMWebService than creating another web service. It is accurate the procedure is performed entirely in IIS and not in the PVWA Applications configuration UI.

Test thoroughly before setting up in Production.

L3 Networker

Hi @sanjay sah​ !

 

The information you need is located here: https://docs.cyberark.com/credential-providers/latest/en/content/cp%20and%20ascp/application-authentication-methods-general.htm#ClientCert

 

The summary is that you need to add the certificate attribute of SAN via API. There is no option to do this through the PVWA.

Hi @sanjay sah​ ,

 

I think @Donovan Demshock​ is talking about CCP server configuration and NOT AppID configuration.

@Darren Khan​ Yes I understood that I have to use API. It configures SAN value with respective AppID. What if I have to revert it back? With API Call, where does the SAN value gets set in Cyberark incase I have to revert back?

There is another DELETE call that you make via REST API - https://docs.cyberark.com/pam-self-hosted/latest/en/content/webservices/delete%20a%20specific%20authentication.htm

Yes sir I tested it works fine however it would be better if SAN attributes options would be on the PVWA Console.

  • 1 accepted solution
  • 124 Views
  • 8 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!