- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
01-22-2026 07:35 AM
It can be very basic question for many but not for me. I am curious to know and learn about this.
I was going through below document related to Client Certificate authentication and there is it is mentioned that we can use the SubjectAlternativeName, Subject, or Issuer attribute to authenticate the application instead of the serial number. I see we have "Serial Number" option in application tab of the PVWA for any appID however, If I need to put SAN value then where should I populate?
02-02-2026 12:30 PM
There is another DELETE call that you make via REST API - https://docs.cyberark.com/pam-self-hosted/latest/en/content/webservices/delete%20a%20specific%20authentication.htm
01-22-2026 09:12 AM
Hello,
The following link contains a section describing setting up certificate mapping in IIS to do what you describe. https://docs.cyberark.com/credential-providers/latest/en/content/ccp/configure_ccpwindows.htm
01-22-2026 09:18 AM
So basically, I need to create another web service similar to `AIMWebService` and SAN value info over there and not anything in PVWA's console AppID part?
01-22-2026 09:22 AM
Hello,
It is more adding a feature set to the AIMWebService than creating another web service. It is accurate the procedure is performed entirely in IIS and not in the PVWA Applications configuration UI.
Test thoroughly before setting up in Production.
01-23-2026 10:54 AM
Hi @sanjay sah !
The information you need is located here: https://docs.cyberark.com/credential-providers/latest/en/content/cp%20and%20ascp/application-authentication-methods-general.htm#ClientCert
The summary is that you need to add the certificate attribute of SAN via API. There is no option to do this through the PVWA.
01-23-2026 10:54 AM
Hi @sanjay sah ,
I think @Donovan Demshock is talking about CCP server configuration and NOT AppID configuration.
01-23-2026 11:38 AM
@Darren Khan Yes I understood that I have to use API. It configures SAN value with respective AppID. What if I have to revert it back? With API Call, where does the SAN value gets set in Cyberark incase I have to revert back?
02-02-2026 12:30 PM
There is another DELETE call that you make via REST API - https://docs.cyberark.com/pam-self-hosted/latest/en/content/webservices/delete%20a%20specific%20authentication.htm
02-02-2026 01:16 PM
Yes sir I tested it works fine however it would be better if SAN attributes options would be on the PVWA Console.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

