PaloAlto Redundant VPN tunnel with NAT-T between datacenter and AWS environment

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PaloAlto Redundant VPN tunnel with NAT-T between datacenter and AWS environment

L0 Member

Dear All, Can you share your views/suggestions for below questions. Thank you


1. What is the standard best practice for setting up redundant VPN tunnel with NAT-T with PaloAlto between datacenter and AWS customer environment
2. Can we have two PaloAlto FW in two different vlans as Active-Active configuration without any sort of sync between them behind a load balancer.

 

Appreciate your inputs.

3 REPLIES 3

L5 Sessionator

VM Series in AWS supports Active/Passive only and must be in the same Availability Zone. Here is where you can find more information on this setup

 

https://www.paloaltonetworks.com/documentation/81/virtualization/virtualization/set-up-the-vm-series...

Dear jperry1

Thanks much for your inputs.Will go through the link.

 

Hello,

Also check out the documentation on AWS, they have best practives and deployment guides:

 

https://www.paloaltonetworks.com/documentation/81/virtualization/virtualization/set-up-the-vm-series...

 

Cheers!

  • 3056 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!