Trust interface on vm not coming up in AWS

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Trust interface on vm not coming up in AWS

L1 Bithead

Im doing some testing in AWS with a DEV server on the inside of my vm 100..  I have E1/2 configured as gateway interface with a ENI private IP address we created in AWS.  However, after troubleshooting almost the entire day I cant get it to come up.  Im using 9.0.1 so this could be a bug but Im not sure.  Has anybody every encountered this?


L1 Bithead

The intercace not coming up: is that means no traffic flow? If it’s newly added to the VM, please make sure that disable source/ destination check of the ENI.

I have a better understanding of the problem. In AWS , the way the IP addresses are allocated are very confusing to me. Ive read the PA documentation and I cant find anywhere were it explains how you are supposed to use the Eth0, Eth1, etc and how these map back to the Palo Alto vm's.  I have to understand IP addressing in AWS land and I just cant get my head around it.  If anybody has a knowledge based article that explains this please send.  Also, the vm-series deployment guide IS NOT helpful for this. Yes, I read it

AWS ETH0 = PA Management





This assumes you did not perform an interface swap during deployment.  If so Management and ETH1/1 would be reversed so that ETH1/1 is the target of an ELB.


Thank you. unfortunately, that brings up more questions so I think I will stop here

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!