Issue with 2FA Authentication via RADIUS (CyberArk) for GlobalProtect (Palo Alto) – Unable to Change Password

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Issue with 2FA Authentication via RADIUS (CyberArk) for GlobalProtect (Palo Alto) – Unable to Change Password

L0 Member

Hello,

I’m encountering an issue with 2FA authentication using RADIUS (CyberArk) for GlobalProtect (Palo Alto).

  • Authentication with 2FA works correctly, but users cannot change their passwords via the GlobalProtect client. No password change prompt appears.
  • I understand that PAP is being used as the RADIUS authentication protocol, which likely does not support password change requests.
  • As a result, when a password expires, users get no notification or guidance. Ideally, GlobalProtect would be able to at least inform the user that their password has expired and provide a link to the CyberArk portal for manual password updates.

 

Is there a recommended RADIUS setup or Palo Alto configuration that allows either:

Password change prompts from GlobalProtect, or at minimum, expired password notifications and redirect links to an external portal like CyberArk?

 

OR are there known workarounds for PAP-based RADIUS 2FA setups with CyberArk to achieve the above?

 

Any configuration examples, documentation links, or community experiences would be greatly appreciated.

Thank you in advance for your help!

1 accepted solution

Accepted Solutions

L7 Applicator

Hi @Jakub Woźniak​ 

 

Instead of authenticating via RADIUS, configure GlobalProtect client to redirect user to the Identity portal or PVWA.

 

And if SAML is not an option, then a possible workaround for your PAP-based RADIUS setup if users are synchronized with AD, you can set up an authentication sequence on your Palo Alto firewall.

 

Hope it helps !

View solution in original post

4 REPLIES 4

L7 Applicator

Hi @Jakub Woźniak​ 

 

Instead of authenticating via RADIUS, configure GlobalProtect client to redirect user to the Identity portal or PVWA.

 

And if SAML is not an option, then a possible workaround for your PAP-based RADIUS setup if users are synchronized with AD, you can set up an authentication sequence on your Palo Alto firewall.

 

Hope it helps !

L4 Transporter

Hi @Jakub Woźniak​ 

 

It seems that @Malhar Vora​ provided an answer to your question. Could you kindly let us know if this solution helped?

If so, please mark the answer as 'Select as Best' to assist other community members.

 

Thank you, Shaked

L4 Transporter

I second the recommendation to use SAML for better security and more options. Read the discuss here, to learn more why: https://community.cyberark.com/s/article/The-Case-for-Moving-Away-from-RADIUS-Embracing-SAML-and-Best-Practices-for-Enhanced-Security

 

With RADIUS and SAML, GlobalProtect still does not have the password to be managed, so you need to direct users to the CyberArk self-service password reset or the source directory for CyberArk such as AD.

 

If you want to set up SAML with GlobalProtect, you can use these instructions: https://docs.cyberark.com/identity/latest/en/content/applications/certified-apps/paloaltonetworks.htm

L0 Member

Hello, I configured SAML and it works fine, thanks for support.

  • 1 accepted solution
  • 136 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!