- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
11-03-2025 05:21 AM
Hello,
I’m encountering an issue with 2FA authentication using RADIUS (CyberArk) for GlobalProtect (Palo Alto).
Is there a recommended RADIUS setup or Palo Alto configuration that allows either:
Password change prompts from GlobalProtect, or at minimum, expired password notifications and redirect links to an external portal like CyberArk?
OR are there known workarounds for PAP-based RADIUS 2FA setups with CyberArk to achieve the above?
Any configuration examples, documentation links, or community experiences would be greatly appreciated.
Thank you in advance for your help!
11-04-2025 11:23 PM
Hi @Jakub Woźniak
Instead of authenticating via RADIUS, configure GlobalProtect client to redirect user to the Identity portal or PVWA.
And if SAML is not an option, then a possible workaround for your PAP-based RADIUS setup if users are synchronized with AD, you can set up an authentication sequence on your Palo Alto firewall.
Hope it helps !
11-04-2025 11:23 PM
Hi @Jakub Woźniak
Instead of authenticating via RADIUS, configure GlobalProtect client to redirect user to the Identity portal or PVWA.
And if SAML is not an option, then a possible workaround for your PAP-based RADIUS setup if users are synchronized with AD, you can set up an authentication sequence on your Palo Alto firewall.
Hope it helps !
11-17-2025 06:32 AM
Hi @Jakub Woźniak
It seems that @Malhar Vora provided an answer to your question. Could you kindly let us know if this solution helped?
If so, please mark the answer as 'Select as Best' to assist other community members.
Thank you, Shaked
11-18-2025 09:18 AM
I second the recommendation to use SAML for better security and more options. Read the discuss here, to learn more why: https://community.cyberark.com/s/article/The-Case-for-Moving-Away-from-RADIUS-Embracing-SAML-and-Best-Practices-for-Enhanced-Security
With RADIUS and SAML, GlobalProtect still does not have the password to be managed, so you need to direct users to the CyberArk self-service password reset or the source directory for CyberArk such as AD.
If you want to set up SAML with GlobalProtect, you can use these instructions: https://docs.cyberark.com/identity/latest/en/content/applications/certified-apps/paloaltonetworks.htm
11-18-2025 10:57 PM
Hello, I configured SAML and it works fine, thanks for support.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

