How to determine if Palo Alto is fully operational after reboot

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

How to determine if Palo Alto is fully operational after reboot

L0 Member

What is the best way to determine if Palo Alto is fully operational after a reboot. Currently, I am using the ability to log into the API as a gauge, but unfortunately Palo Alto is not fully available at that time.

 

When doing PanOS upgrades in the past, I have given it 3 additional minutes to stabilize before applying a configuration change, but with 8.1.23, this is no longer adequate. I have moved my "stabilization" time to 10 minutes and that seems to work better, but there has to be a better way.

 

With 8.1.23 and waiting three minutes, I can upload and install a configuration, but the commit fails with "Commit job was not queued. All daemons are not available." or thereabouts. Other actions in the past have to be retried multiple times until they succeed.

 

What API should I call / check to determine when it is ACTUALLY operational.

 

Thanks

1 REPLY 1

L5 Sessionator

Hi @tsoftware, have you tried this one?

https://{{host}}/api?key={{key}}&type=op&cmd=<show><chassis-ready></chassis-ready></show>

 

Hope that helps!

Help the community: "Like" helpful comments, and click "Accept as Solution" if you found your answer 🙂
  • 1712 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!