10-16-2017 04:13 PM
hi all,
I noticed that everytime I push a new IP into a DAG it takes a while for it to register. sometimes it takes 30 seconds, sometimes longer. is there a way to make this into effect instantaneously ? Thanks
10-19-2017 11:22 AM
Hello,
That is normal behavior. You can see the tags show up immediately in the list of tag mapping with the command:
show objects registered-ip all
But it won't show up in the actual Address Group in the GUI or CLI for up to 60 seconds. The Firewall refreshes the address groups from the tag mapping every 60 seconds, so depending on where in that cycle the tag was added, it could appear in the address group in 1 second or 59 seconds or anywhere in between.
More information here:
Search that page for the words: "60 seconds"
Best regards,
-Brian
10-19-2017 11:22 AM
Hello,
That is normal behavior. You can see the tags show up immediately in the list of tag mapping with the command:
show objects registered-ip all
But it won't show up in the actual Address Group in the GUI or CLI for up to 60 seconds. The Firewall refreshes the address groups from the tag mapping every 60 seconds, so depending on where in that cycle the tag was added, it could appear in the address group in 1 second or 59 seconds or anywhere in between.
More information here:
Search that page for the words: "60 seconds"
Best regards,
-Brian
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
