Juniper SRX 5800 to PA-7050 migration

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Juniper SRX 5800 to PA-7050 migration

L0 Member

Trying to migrate SRX 5800 ver 20.4R3-S3.4 cluster using Expedition. I have done quite a few SRX migrations but this one doesn't show any of the global routing instance information. Because of this there are tons of BGP and OSPF configuration that wont show up. Does anyone have any experience with this issue? Is there another way to bring the BGP and OSPF config from the SRX 5800 into Expedition. If not I will have to manually build it on the Palo.

1 accepted solution

Accepted Solutions

L6 Presenter

@DustinBranham Only static routes are supported by Expedition , Dynamic routing configuration are not supported, those will need to be rebuild in Palo Alto Networks Firewall. 

View solution in original post

2 REPLIES 2

L6 Presenter

@DustinBranham Only static routes are supported by Expedition , Dynamic routing configuration are not supported, those will need to be rebuild in Palo Alto Networks Firewall. 

L3 Networker

Export your BGP routes to a text file and append them as static routes to your config file manually, this'll allow expedition to read them in and works easier on your NAT/Security policies regarding their zones.

  • 1 accepted solution
  • 1883 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!