migration Nat related

[IAmJi1]

I have imported a JUNOS 20.4R3 configure xml file to expedition and for NAT policy expedition automatically changes to bi-direction policy. May I know why?? I have searched JUNOS documents and I found out that if it is a bi-direction policy it goes to the bi-direction nat rule but in my xml it does not have any thing related to bi-direction.
i am currently using expedition 1.

I have attached an example and the result of migrating to panos

[dpuigdomenec]

Hi @IAmJi1 

Could you attach your original configuration into a TAC case and share it with us on the fwmigrate@paloaltonetworks.com email.

The TAC case is only required for sharing files purposes.

We will check your issue after winter holidays.

Thanks and best regards,

David 

[IAmJi1]

it would be great if you could share the link to the page where I could open the TAC case so that I could share the original configuration to fwmigrate@paloaltonetworks.com email

Thank you

[dpuigdomenec]

Hi @IAmJi1 

Please use the customer support portal to open a case and upload the file into it. Add a note in the case stating the case could be closed as it is only required for sharing files purposes.

https://support.paloaltonetworks.com/Support/Index

Thanks,

[IAmJi1 · Accepted solution]

Hi

thank you for your reply, I ckecked my junos xml file and on xml file bi-direction option was on.

It was just that on Junos CLI show configuration file did not show the bi-direction option.

Thanks for your support

[dpuigdomenec]

Hi @IAmJi1 

Thanks for the update.

Great the parser runs as expected given the XML file.

Best,