- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
10-04-2018 12:46 AM
It works, the only weird thing we've found is when you selec the template where to import the view changes to the paloalto import, so I had to naveigate again to CSV and then click on the VR and the VSYS to import but imported correctly, I will open a big to avoid the view change when the template is selected. !
10-04-2018 07:35 AM
Mine never appear for mapping even after the selection. would you add your imported csv to this post for me to try? maybe it is formatting?
10-04-2018 08:38 AM
Attached, its pretty straight forward. Then I mapped first col with IPaddress, second with netmask and third as Gateway
10.0.0.0;255.255.255.0;10.0.0.1 20.0.1.0;255.0.0.0;20.0.2.1
10-04-2018 11:29 AM - edited 10-04-2018 12:56 PM
So, there are a few problems.
1) When there is a problem somewhere in my file that is causing the entire file to fail, is there a log of what line it is erroring out on?
2) it isn't importing my next hop for some reason and I dont know why, is there a place I can send my file?
3) There is no option for Administrative Distance
4) Cosmetic, but Gateway should be named "NextHop"
Here is a sample: interface, name, ip/CIDR, NextHop(Gateway), Metric
'''
ethernet1/9.904;166.26.100.201-32;166.26.100.201/32;172.16.4.1;1
'''
10-04-2018 01:02 PM
It appears that if I add an interface, that the next hop disappears.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!