2 site-2-site tunnels between 2 PAN devices

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

2 site-2-site tunnels between 2 PAN devices

L2 Linker

Hello all,

Would it be possible to setup 2 site-to-site tunnels between 2 PAN devices? I’d like to have 2 “parallel” tunnels to split the traffic in 2 different zones.

Regards,

Stephan van der Plas

3 REPLIES 3

L7 Applicator

Hello Stephan,

As per my understanding, it is possible to create 2 different tunnels between 2 PAN firewall. The only thing is, we have to define 2 proper routes pointing towards correct tunnel interfaces

OR

If you add those different subnets under PROXY ID, It also creates separate phase 2 tunnels between them (with different SPI key).

Thanks

L7 Applicator

Adding a diagram for better understanding.

Ipsec.jpg

L7 Applicator

I am a little confused by the question.

Is the reason you want two tunnels to keep traffic separate for policies?

If so, you should be able to accomplish this task with a good zone layout on both firewalls and still use the same tunnel.

can you speak a little more on the communications layout and what you want to secure?

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
  • 2596 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!