Adding 2nd External IP range to firewall

[GC66]

Hi,

We have a set of external IPs and a virtual router setup with a default route of 0.0.0.0/0 going out though an address in the External range which is our ISP router

We're adding another /25 range of External IPs to the router (different subnet completely from previous IP range). How do we get the firewall to use these?

Thanks

[sraghunandan]

Have you tried configuring secondary ip address on that very same interface

[panos]

you may add another VR or use PBF if default route of this subnet is different.

To add this subnet you may see that

https://live.paloaltonetworks.com/message/36212#36212