Alert Config

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Alert Config

L3 Networker

Folks,

I would like to configure the PAN firewall to send an email alert whenever the firewall config is changed or edited . Any ideas on how to accomplish this ?

Thanks

1 accepted solution

Accepted Solutions

L5 Sessionator

Hello usvi,

Any configuration changes done on the firewall are viewed under Monitor > Logs > Configuration with filter as (cmd eq edit)

1.) Configure an email server profile under Device > Server Profiles > Email.

The gateway ip address is the SMTP server used to send an email

2.) Set that email server profile for config changes under Device > Log settings > Config

Hope that helps!

Thanks and regards,

Kunal Adak

View solution in original post

3 REPLIES 3

L5 Sessionator

Hello usvi,

Any configuration changes done on the firewall are viewed under Monitor > Logs > Configuration with filter as (cmd eq edit)

1.) Configure an email server profile under Device > Server Profiles > Email.

The gateway ip address is the SMTP server used to send an email

2.) Set that email server profile for config changes under Device > Log settings > Config

Hope that helps!

Thanks and regards,

Kunal Adak

Isn't this missing a step? Where is the "cmd eq edit" or the "cmd eq commit" (for submissions) defined in this configuration?

Hello hvcomputech,

cmd eq edit | cmd eq commit are filters you can use while viewing the configuration logs.

For the email alerts, however, there is no option to filter what configuration sub-sections are sent out... so you are correct, but those are not needed for the email alert configuration.

fyi, other cmd filter options include:

cmd eq set

cmd eq delete

cmd eq move

cmd eq rename

cmd eq clone

cmd eq add

cmd eq request

Regards,

tasonibare

  • 1 accepted solution
  • 5568 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!