Azure HA not coming up

cancel
Showing results for 
Search instead for 
Did you mean: 

Azure HA not coming up

L4 Transporter

Do I need license to test Azure HA scenario. I am following all the steps but HA1 doesn't come up.

I don't have any licenses. And doing a test run of implementation as HA active/passive.

Default 10.0 gets installed with BYOL, but we don't have license yet. 

1 ACCEPTED SOLUTION

Accepted Solutions

 

@reaper

 

@reaper  Thanks for confirming..I actually found the issue. Every time i deployed a new set, the default NSG on management port was allowing only a small subnet which did not include management subnet. Its resolved now

 

View solution in original post

2 REPLIES 2

L7 Applicator

you don't need a license for HA1 to work, but your vnet subnet needs to be set up properly

 

are both ha1 interfaces member of the same subnet and did you add a route table (if you did, removing it)

make sure the ha1 interfaces are in their own subnet

Tom Piens
Like my answer? check out my book! https://bit.ly/MasteringPAN

 

@reaper

 

@reaper  Thanks for confirming..I actually found the issue. Every time i deployed a new set, the default NSG on management port was allowing only a small subnet which did not include management subnet. Its resolved now

 

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!