CAPTIVE PORTAL TIME-OUT

Reply
Highlighted
L0 Member

CAPTIVE PORTAL TIME-OUT

SETUP: PALO ALTO connected to ACTIVE DIRECTORY for groups
CAPTIVE PORTAL ACTIVATED 
idle time-out 500minutes
timer: 600minutes

CLI> show user ip-user-mapping ip x.x.x.x

SCENARIO 1: 
user log in to PC > mmp1234
CLI> show user ip-user-mapping ip 1.2.3.4.
Ip address: 1.2.3.4
User: mmp1234
From: UIA
idle-timer:3000s (3k)

SCENARIO 2: 
after logging in to PC, user will now login to CAPTIVE PORTAL
CLI> show user ip-user-mapping ip 1.2.3.4.
Ip address: 1.2.3.4
User: mmp1234
From: CP
idle-timer:30000s (30k secs  = 500minutes)

PROBLEM:
After 15minutes or more, 
CLI> show user ip-user-mapping ip 1.2.3.4.
Ip address: 1.2.3.4
User: mmp1234
From: UIA
timer:3000s

QUESTION>
Why is it changing to UIA? I want CP to remain for 500minutes or 600minutes without any disturbances.

NOTE> 
I am sure that this user does not login on any other PC.



Highlighted
Community Team Member

Re: CAPTIVE PORTAL TIME-OUT

Hi @justine_gumba ,

 

I'm leaning towards having Client Probing enabled on the UIA.

 

Hope this helps,

-Kiwi.

Highlighted
L0 Member

Re: CAPTIVE PORTAL TIME-OUT

Hi @kiwi ,

Enable Probing - not enabled
probe interval- 600min
Enable User Identification Timeout - not enabled
User Identification Timeout - 45min

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!