CLI ping and traceroute resolving ip

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

CLI ping and traceroute resolving ip

L3 Networker

Hi,

In the GUI the PA is resolving ip address by quering the dns server. But with CLI commands like ping and traceroute it doesn't seems to do DNS resolving. I think it should be because there is a CLI command no-resolve.

Any ideas why it isn't resolving in the CLI?

3 REPLIES 3

L4 Transporter

Hi,

What is your service route setting for DNS?

Default and I think that default means MGMT

Hi,

So would you make sure that the mgmt ip can reach the DNS server? you may need to allow the mgmt ip to access the dns server if the mgmt ip need to pass through the PA box before it can access the dns server.

  • 3228 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!