Cli shows undecided and GUI shows incomplete

Showing results for 
Search instead for 
Did you mean: 

Cli shows undecided and GUI shows incomplete

Cyber Elite
Cyber Elite

Need to know why CLI and GUI show this behaviour?




Everything is working fine now. After double checking my config, I made a basic network mistake, on the trust interface I added the without the /24 block.  Once I added the subnet the FW  was able to identify all traffic passing thru the interface.


I guess since the interface was only able to see limited traffic it wasn't able to make an app-id identification. I noticed a great deal of drop packages with the show  counter global, and other commands. Eiher way I learned a lot with this excercise. 


Thanks for taking the time and assist Guys like me.


Stay secure all!

Thanks for sharing with us.

We all leran from each other here.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!