Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

CNSE Exam Study Guide Rev B - Pass Mark

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

CNSE Exam Study Guide Rev B - Pass Mark

L2 Linker

I am cracking on with study for the CNSE exam but on reading the latest release of the study guide have got a bit confused regarding the pass mark.

In the Rev B of the study guide the pass mark is shown as 60% but in the original release it was set at 100 questions in 2.5 hours with a pass mark of 70%.

Has it been reduced?

The FAQs on the education schedule are still for the old 3.1 exam as show 60 questions rather than 100 so just trying to see where the bar has been set prior to walking into the exam.

On another note how have people found the new 4.1 exam?  - i know my stuff just suck when it comes to sitting in the exam room!!!

25 REPLIES 25

oh well - worth a try.

I know there was a partner promotion that dealt with getting a PA-200.

Re the cert - really not sure - i have a feeling it is just the pdf version.

Hello Gents~

To clarify, the promotion with the PA-200 has ended. The certificates are sent out in soft-copy format, because they are generated on the fly. This allows you to print the certificate out using whatever means and paper you wish; also, the email containing the certificate also contains the CNSE logo file, for use on business cards and such. There is not a CNSE shirt that is sent upon exam completion, as is the case with the ACE exam. Instead, an engineer who successfully completes the CNSE exam will receive a Certified Network Security Engineer backpack.

Cheers and congratulations on a job well done...

Michael

Michael,

Thanks for the clarification.

Will await the backpack!!

Shame about the shirt though as means i will have to do some washing again! :smileymischief:

Thank you Michal... I am glad I achieved it. Smiley Happy

AAhhh... was so much eager to own a PA-200 to play around on a personal network... No worries...!!!!

Regards,

Kalyan

L2 Linker

As I have been preparing for the CNSE I have observed that there are several documents referenced in the official "Study Guide" that flat-out don't exist... a prime example would be https://live.paloaltonetworks.com/docs/DOC-1163, which resolves to a 404.  Unfortunately, in the Study Guide, it says of this document, "There are two docs, read the one titled 'How to configure an IPSEC VPN' - there are a number of questions on IPSec, you should definitely follow this doc to configure a tunnel."  Great advice, but the freaking document doesn't bloody exist!  The title of it in the Study Guide is "Tech Note - How to configure site2site IPSec 4.0.pdf"  If anyone can find that, please let me know.  😉

Cheers,

-C

FYI, DOC-1163 is officially titled "How to Configure and Troubleshoot IPSec VPNs"... sounds like the kind of doc one would want to read in preparation for the CNSE.  *sigh*

Hi C

did you grab the latest guide at Certified Network Security Engineer (CNSE) ?

regards

Tom

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Hi,

In CNSE exam, on which PAN OS is it 5.X or 6.X?

Hi,

the CNSE exam based on the X.1 Version, the 6.1 is not release at the moment. So 5.1.

Any word on when 6.1 will be released and the exam updated?

L2 Linker

As long as you have solid, real-world experience with PAN-OS, including dynamic routing (e.g. BGP and/or OSPF), good networking fundamentals, and know the product line well, you should be able to get by with reading the design recommendation guides a couple of times, spending some time on the GUI, and reading-up on Panorama.  That's basically what I did.  Mind you, I have installed a couple of dozen PA boxes because I work for a VAR, so my experience is a bit unfair compared to someone who's married to a single install.

  • 12839 Views
  • 25 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!