Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Configure L2 service on Active-Active Mode

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Configure L2 service on Active-Active Mode

L0 Member

I'am using PAN-PA-3220

We want to setup this model with:

1. HA (active-active)

2. Interface configuration using Layer 2 configuration

 

Is it possible to done it?. as when I try to create Layer 2 configuration. It always pop out error "Layer 2 unable to configure due to HA in active-active mode.

Can help to suggest or any ways to do it?

 

*ps: customer request to do active-active mode with VLAN configuration

1 REPLY 1

Community Team Member

Hi @Hazzuan ,

 

Active-Active is not possible on a Layer 2 only deployment mode. Active-active HA mode requires the firewalls to have separate routing and forwarding tables, which is not feasible with a Layer-2-only mode.

 

You will need to create VLAN interfaces or have an L3 deployment in order to use the A/A HA mode. 

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.
  • 886 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!