06-28-2021 03:07 PM
For the Flood Protection calculations: Alarm, Activate, and Maximum - the documentation states to use the baseline thresholds (average) for the zone. I have used the OIDs to do this, however, why would I be using the TOTAL ZONE baseline and not just TCP CPS? As how else would I calculate UDP, and IP flood protection? They would ALL be set to the SAME RATES.
Shouldn't this be use the PROTOCOL baseline (SYN, TCP, IP, ICMP, etc.) to calculate the proper Alarm, Activate and Maximum settings?
Someone please help......
03-24-2022 09:38 AM
Yes, I have those. Here is the issue. It just pulls the logs into a CSV file. That file is so big that when importing into Excel, in my environment, you only get about 3 mins worth of traffic. Clearly not enough to calculate.
I pivoted and used PRTG to graph CPS across time. This was the ONLY thing that I was able to use that was not manual.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!