CPU/RAM/Memory Alarms in PAN-OS

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

CPU/RAM/Memory Alarms in PAN-OS

L0 Member

Is there a feature in PAN-OS to set CPU/RAM/Memory usage exceeding threshold x% in the same way Device>LogSettings>AlarmSettings has variables to track Log DBs?

 

This could be useful towards spinning up a new instance for the vFW to load balance to if the current vFW instance is being pushed too hard.

1 accepted solution

Accepted Solutions

L7 Applicator

Hi @timgowan

 

Unfortunately this isn't possible ... at least for now. With Panorama 8.1 there might be something that you're asking for: "With device health monitoring, Panorama provides a deployment-wide view into the health and status of your next-generation firewalls." Source: https://www.paloaltonetworks.com/products/new/new-panos8-1

Of course this requires that you use panorama...

 

Other possibilities are if you monitor the CPU and RAM usage (and maybe also session utilization) with snmp. With these values you can then build the automation to spin up new firewalls automatically when they are needed.

View solution in original post

1 REPLY 1

L7 Applicator

Hi @timgowan

 

Unfortunately this isn't possible ... at least for now. With Panorama 8.1 there might be something that you're asking for: "With device health monitoring, Panorama provides a deployment-wide view into the health and status of your next-generation firewalls." Source: https://www.paloaltonetworks.com/products/new/new-panos8-1

Of course this requires that you use panorama...

 

Other possibilities are if you monitor the CPU and RAM usage (and maybe also session utilization) with snmp. With these values you can then build the automation to spin up new firewalls automatically when they are needed.

  • 1 accepted solution
  • 4977 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!