Dataplane Crash in Paloalto after firmware upgrade

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Dataplane Crash in Paloalto after firmware upgrade

L4 Transporter

Upgrade the Customer device from 7.1.25 to 8.1.12 and after the upgrade, we are facing issues with Dataplane Crash. Attached is the error message. Below bug matches the error. We have also tried to downgrade the Firmware to 8.1.10 and the issue still persists. Device was having some HA related configuration earlier which we removed before downgrading to 8.1.10. Earlier the device was in HA and upgrade was performed to 8.1.12. So in order to isolate the issue, HA settings were disabled before downgrading to 8.1.10 from 8.1.12 and the issue still persists. HA was enabled for future use but we disabled while downgrading the firmware to 8.1.10


please address this incident.


Community Team Member

Hi @Mohammed_Yasin ,


As far as I can read it's not confirmed that you're hitting this exact bug referenced in the link.

Check if there are related corefiles created with the following command


> show system files


Export them and together with the tech support file have them analyzed by TAC to confirm wether or not you're hitting this issue or if you are experiencing something else.


Cheers !


LIVEcommunity team member, CISSP
Don't forget to hit that Like button if a post is helpful to you!
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!