Destination NAT Error

[vishal_07]

Hello All,

Doing an destination Nat but getting below Error. Could anyone please help me. Also pls find below my nat rule

Please note : Ethernet 1/1 is my Outside Interface

[FarhanKoujalgi · Accepted solution]

Dear Vishal 

Please find the below article on how to configure Destination NAT

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PMtuCAG

[SureshReddyM · Accepted solution]

Hi,

As per NAT configuration The destination address (shown above)  is NOT actually an address, but an address object with name as IP address as shown.So change the name, and change address to be a single IP or with a /32 to resolve this issue.

Regards,

Suresh

[vishal_07]

Thanks Farhan and Suresh for your reply.

But in my scenerio i have configured WAN ip 182.72.153.82/30 on outside interface port ethernet1/1 and my isp has given 182.71.48.176/29 Lan IP using this ip pool i have to configure destination nat. Example

182.71.48.177/32 will assign to 10.10.10.1/32

182.71.48.178/32 will assign to 192.168.10.1/32

What configuration i need to do to achieve this.

Please help