DHCP Discard session

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

DHCP Discard session

L4 Transporter

Scenario is we have ISP connected to Outside zone.

DHCP server on Inside Zone.

On Each satellite we have DHCP relay configured to readh DHCP server.

Whenever there is any issue with Power at location where interface connected to inside zone goes down.

Traffic gets routed to Outside zone and inturn gets discarded session as we dont have security policy to allow that traffic.

We have to manually clear that particular session for DHCP to work.

Any suggestions on this issue.

 

Thanks In Advance.

SD-WAN | Cloud Networking | PCNSE | ICSI CNSS | MCNA | | CCNP | CCSA | SPSP | SPSX | F5-101 |
1 REPLY 1

Cyber Elite
Cyber Elite

sounds like your session discard state is being refreshed (by receiving dhcp packets too frequently) causing the same session to remain in discard state

 

you can change the discard state timeout:

 

> show session info

...
--------------------------------------------------------------------------------
Session timeout
  TCP default timeout:                           3600 secs
  TCP session timeout before SYN-ACK received:      5 secs
  TCP session timeout before 3-way handshaking:    10 secs
  TCP half-closed session timeout:                120 secs
  TCP session timeout in TIME_WAIT:                15 secs
  TCP session timeout for unverified RST:          30 secs
  UDP default timeout:                             30 secs
  ICMP default timeout:                             6 secs
  other IP default timeout:                        30 secs
  Captive Portal session timeout:                  30 secs
  Session timeout in discard state:
    TCP: 90 secs, UDP: 60 secs, other IP protocols: 60 secs

you can use this operational command to change the timeout to figure out what is the ideal timeout

admin@myNGFW> set session timeout-discard-udp 
  <value>  <1-15999999> set timeout of udp session in discard state

i would recommend gradually decreasing from the default 60 seconds and not immediately going to the 1 second minumum as there is a good reason the discard state is 60 seconds 😉 )

 

you can change this timer through configuration once you find the sweet spot

admin@myNGFW> configure 
Entering configuration mode
[edit]                                                                                                                                                                                          
admin@myNGFW# set deviceconfig setting session timeout-discard-udp 
  <value>  <1-15999999> set timeout of udp session in discard state

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization
  • 2346 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!