12-21-2017 04:43 AM
Hi,
I have a case where we have to PA FWs and there is 3 connections between them,
1- Two Microwave Links (Up to 100mbps)
2- One DSP Link (Up to 10mbps)
There is a total of 3 IPSec Tunnels and i'm using weighted round robin, however, i don't know how to calculate the weights and what numbers i should put in the ECMP to reflect the real speeds of the links.
12-21-2017 05:18 PM
The weights are simply relative to each other with higher being better (up to 255). So in your case I would simply use 100 and 10 as the values matching the bandwidth of the circuits.
12-21-2017 05:18 PM
The weights are simply relative to each other with higher being better (up to 255). So in your case I would simply use 100 and 10 as the values matching the bandwidth of the circuits.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
